SOFTWARE AND FIRMWARE FOR CS800/CS801

December 30, 2016

2000 Channels and 65536 Contact

 

CPS Version 4.00.39

December 30, 2016

 

This version fixed a few minor problems and is more compatible with special readers used by the visually impaired.

August 25 , 2016

2000 Channels and 65536 Contact


Firmware Version 3.00.08

August 25 , 2016

This version of firmware adds in the following features:
(1)Front Panel programming capability via microphone keypad entry - P1 saves, P2 exits without save Temporary TX Contact Change via keypad entry for BrandMeister TG changes
(2)Support for Digital Monitor mode and capture

Known Bugs:
(1) Volume is still at maximum after program upload
(2) Display does not properly indicate Digital Monitor Mode information
(3) GPS shows in display menu but is not operational in firmware yet

A front panel update is requred for the Digital Monitor mode to operate as it does on the CS750 series radios. It will be released as soon as it is available to us.

April 20, 2016
2000 Channels and 65536 Contact

Instructions on Programming CS800 and CS750

April 20, 2016

This is a PDF document that explains how to program the CS800 and CS750. If you have not changed the firmware before,or having problems, this document is worthwhile reading

SEPTEMBER 17, 2015

Prolific Drivers and Documentation

The front panel programming cable uses a Prolific Integrated Circuit. This chip requires you to have a driver in your PC to use that cable. This cable uses a chip that is probably not compatible with the Windows 8 or Windows 10 operating system. The documentation within the ZIP files explains how to determine what version of the Prolific Chip you have and what Microsoft Operating system it is compatible with.

 

 

Contact Manager The Contact Manager is a free program written and supported by Tom Wheeler that allows you to move code plugs between different radios. Clicking on this link jumps to Tom Wheeler's web site.